cancel
Showing results for 
Search instead for 
Did you mean: 

How to increase ring time

Anonymous
Not applicable

Even after O2 customer service told to me to input **61*901*11*30# to increase ring time to 30 seconds before voicemail kicks in, and press call on my Samsung Galaxy S7, it did not work. A message states " connection problem or invalid MMI code". Please help. Thanks Keith

Message 1 of 24
51,829 Views
23 REPLIES 23

charleem
Level 2: Apprentice
  • 13 Posts
  • 2 Topics
  • 0 Solutions
Registered:

Did anyone get to the bottom of this?

 

I had the same problem when I was with EE, they couldn't increase the ring time to anything more than 20 seconds either.

 

I think I might have found a way around it though, I'm currently on a Samsung S9+ if anyone is interested.

 

The way I found to have Wifi and 4G calling AND have 30 seconds of ring time was as follows...

 

Log in to my O2 and disable wifi and 4g calling.

 

Reboot your phone, check that the wifi calling icon is missing and if you place a test call it drops from 4G to 3G/2G.

 

Once you're sure that Wifi/4G calling has been removed do the following...

 

Open your dialler and key ##002# SEND to cancel all current diverts. 

 

Check the diverts for each one have been cancelled by dialling *#67# SEND, *#61# SEND and *#62# SEND.  On each reply it should say there's no diverts active.

 

Dial the following...

 

**61*plus 44, seven eight zero two zero nine one nine zero one*11*30# SEND

 

Dial *#61# and it should come up with a reply similar to the picture attached.

 

Activate the rest of the diverts such as busy and unreachable by dialling...

 

*67*+447802091901# SEND

 

*62*+447802091901# SEND

 

You can then check each one to make sure it's active by *#62# and *#67#

 

Log back in to my o2 and reactivate Wifi and 4G calling.

 

Reboot your phone, ensure the Wifi and 4G calling icons are back if applicable, do a test call by checking if your phone falls back to 3G/2G, if not then you're ready to go.  You can check again by dialling *#61# SEND to ensure that the 30 seconds is still showing.  

 

Hope this helps, I know it's a long winded way around it, but it's definitely working for me now and has been for a few days.

 

Charlie.

 

 

 

Screenshot_20180811-180946_Contacts.jpg

Message 21 of 24
4,209 Views

AndyR
Level 1: Joiner
  • 1 Posts
  • 0 Topics
  • 0 Solutions
Registered:

Thanks for the detailled instructions - excellent!


Tried these steps on my S9 but could not set a delay beyond 15 seconds despite trying 20, 25 and 30! Not sure where to go from here...

Message 22 of 24
4,016 Views

MI5
Level 94: Supreme
  • 150224 Posts
  • 641 Topics
  • 28607 Solutions
Registered:
If you have WiFi calling enabled you need to disable it in the settings in your MyO2.
I have no affiliation whatsoever with O2 or any subsidiary companies. Comments posted are entirely of my own opinion. This is not Customer Service so we are unable to help with account specific issues.
Please select the post that helped you best and mark as the solution. This helps other members in resolving their issues faster. Thank you.
Message 23 of 24
4,013 Views

jonsie
Level 94: Supreme
  • 94721 Posts
  • 611 Topics
  • 7060 Solutions
Registered:
Message 24 of 24
4,008 Views