on 19-01-2015 10:04
I got a new all in one printer and I set it up wirelessly. For some reason, when it prints, it's like it does the fast mode and leaves lines between it. I have checked the settings and it is not on fast print. I have also done a print head alignment and it's still the same. Any ideas?
on 19-01-2015 11:41
Some printers have a "nozzle check" feature to show if there are any blockages preventing ink from reaching the paper.
If you were to say what make and model of printer you got someone with a similar machine may be able to help.
19-01-2015 13:11 - edited 19-01-2015 13:13
I note you said you set the printer up wirelessly. I assume that there would be an alternative means to install it (possibly using a USB cable?). If so you could try un-installing the printer and start again using the alternative to see if it works correctly. If it does then you could have another attempt at installing the wireless option. If it does not then you could presumably contact the seller and see if they can help, perhaps even replace the printer.
on 19-01-2015 13:21
I would certainly uninstall it and try again. It just sounds like the configuration is all wrong.
Think about taking it back if a reinstall doesn't fix it.
I use a Kodak and have no problems with it in the 2 years I've had it. A reasonable price and cheap ink. I have only ever used it wirelessly and it's compatible with my pc, phones and tablet so I can print anything.
I can even print at home from anywhere if it's switched on.
on 22-01-2015 11:51